Multi Car Tech Pvt Ltd


Home » Our Products » Automotive Lifts


Automotive Lifts

We are one of the leading wholesaler and trader engaged in providing a large assortment of Automotive Lifts. Our products are manufactured with high-grade raw-material procured from the trusted vendors and are widely known and appreciated for a high-pressure gear pump and lifetime self-lubricating, anti-friction bearings at all pivot points. These products are also provided with customization facility as per the needs, requirements and specifications as per our esteem clients.

 

Following are the products offered by our organization:

Four Post Alignment Lift

Four Post Alignment Lift

Item Code: MCT-GHL-435

We hold immense expertise in catering to the variegated requirements of the customers by bringing forth a remarkable range of Four Post Alignment Lift. The products we are offering are developed and made under the supervision of our experts by trusted vendors as per the clients requirements. Patrons can buy these products as per the specifications detailed by them.

 

Attributes:

 

  • Adopt hydraulic cylinder drive, rope drive, quiet and smooth lifting

  • Hydraulic power unit configuration throttling device, the car always adjust the rate of decline

  • Manual locked release from one side, more convenient to use

  • Adopt mechanical linkage with manual locks, four-point locking system

  • Easy to operate and can be locked in desired height of operations, safety and reliability

  • With wire control security lock set with a wire rope fracture protection, operational safety

  • Runway spacing is adjustable for different wheel base vehicles

  • With the second lift pulley

  • Central jack included

  • Telescopic sliding beam and telescopic arm design, screw-up pad, horizontal pad and short-sleeved pad optional


Technical Specifications :

Lifting capacity3500kg
Lifting height1850mm
Minimum height215mm
Overall Length(included slope)5230mm
Overall Length(do not include slope)4300mm
Overall width3208mm
Width between columns2828mm
Runway width508mm
Runway length4300mm
Within the runway distance 960-1050mm
Central jack raised height350mm
Motor Power2.22.2/3.0/3.5kw
Power supply220v,240v, 380v, 415v




Low Rise Lift

Low Rise Lift

Item Code: MCT-GHPL27

Driven with perfection, we are engaged in catering to the variegated requirements of the customers by bringing forth a comprehensive range of Low Rise Lift. Our offered range is designed and manufactured in accordance with the patrons demands and requirements. Before the end delivery, these products are checked by our quality experts on certain parameters of quality.

 

Attributes:

 

  • Ideal choice for quick tire replacement and simple service alongside of vehicle

  • Surface mounted or movable used with optional movable kits

  • Special and practical platform extension design broadens your service scope

  • Pneumatic release system decreases noise emitted during service work

  • Configuring mechanical safety locks to ensure that lift at different heights to get the absolute security

  • Optional 24V control voltage

  • Anti-skid platform effectively prevents sudden drop-down of vehicle

  • It has been proofed by dynamic testing with 115% of rated capacity and static testing with 150% of rated capacity


Technical Specifications :

Lifting Capacity2700kg
Max. Lifting Height1000mm
Minimum Height105mm
Lifting Time30s
Overall Height for Platform1400mm
Overall Width for Platform1760mm
Width Between Platform700mm
Motor Power2.2kw
Power supply110V/220V/380V
Air Supply6-8kg/cm2
Weight500kg
Motor Power2.22.2/3.0/3.5kw
Power supply220v,240v, 380v, 415v




Two Post Lift - 4 Ton Clear Floor

Two Post Lift - 4 Ton Clear Floor

Item Code: MCT-40CC

Being a client-centric organization, we are engaged in offering an unmatched range of Two Post Lift - 4 Ton to the clients. The offered range of products is procured from the certified vendors of the market, who utilizes maximum amount of raw material and sophisticated technology. These products are designed in compliance with the global norms and standards.

 

Attributes:

 

  • Floor plate design is ideal choice for low ceiling shop

  • By two cylinder, plate & wire rope chain balance system, lifting off & landing smooth

  • Hydraulic power unit configuration throttling device can always adjust the rate of decline. Manual locked release from two sides

  • With 24V limit switch, asymmetric column allows wider drive through clearance

  • Rubber support pad with spiral adjust the height

  • Rubber pad door – Opening protection

  • With guard rail, toe protection

  • Trucks adapters can optional, have adopted 115% dynamic and 150% static

  • CE Certificated


Technical Specification :

Lifting Capacity4000kg
Lifting Height1990mm
Minimum Height110mm
Lifting Time50s
Overall Height2826mm
Overall Width3420mm
Width Between Columns2820mm
Motor Power2.2kw
Power Supply220V 1 PHASE
Weight770kg




Two Post Lift - 4 Ton Base Plate

Two Post Lift - 4 Ton Base Plate

Item Code: MCT-35FA

From the day of commencement, we are engaged in catering to the variegated requirements of the customers by bringing forth a comprehensive Two Post Lift - 4 Ton. Manufactured and developed by our vendors, these products are available in both standard and custom-build solutions. Easy installation, high strength and excellent performance are some of its properties.

 

Attributes:

 

  • Floor plate design is ideal choice for low ceiling shop

  • By two cylinder, plate and wire rope chain balance system, lifting off & landing smooth

  • Hydraulic power unit configuration throttling device, can always adjust the rate of decline

  • Asymmetric column allows wider drive through clearance

  • Manual locked release from one sides, more convenient to use

  • Take three stages arm design, a larger adjustment range, for different vehicle chassis

  • Retractable tray with three screw designed, adjustment range 110-240mm

  • With 24V limit switch

  • Rubber pad door - opening protection

  • Screw type up adjustment adapter, truck adapters can options & standard guard rail toe protection

  • Have adopted 115% dynamic and 150% static loading tested

  • CE Certificated


Technical Specifications :

Lifting Capacity3500kg
Lifting Height1990mm
Minimum Height110mm
Lifting time50s
Overall height2826mm
Overall width3420mm
Width between columns2820mm
Motor power2.2kw
Power supply220V 1 PHASE
Weight770kg




Full Rise Scissor Lift

Full Rise Scissor Lift

Item Code: MCT-GHSL110

Owing to our expertise in this domain, we have been able to cater to the variegated requirements of the customers by bringing forth a wide array of Full Rise Scissor Lift. Due to some properties like high-efficiency, great strength, long life and reliable performance, these are widely acknowledged by our valued customers.

 

Attributes:

 

  • Ground mounting

  • 4-Cylinders structure, 110mm minimum height

  • Anti-skid platform, aluminum motor prevents overheat

  • 24v safety control system

  • 24v height limit switch included

  • Safety signal when lowering from 500mm above ground

  • Platforms extension for lifting long vehicles

  • Pneumatic control lock device

  • 115% dynamic and 150% static loading test passed

  • CE approved


Technical Specifications :

Lifting Capacity

3000kg

Lifting Height

1850mm

Min. Height

110mm

Lifting Time

50S

Overall Length for Platform

1950mm

Motor Power

2.2kw

Power Supply

220V/380V

Oil Pressure

20MPa

Air Supply Pressure

6-8bar

Weight

900kg

Packing Size

 

1550*650*500mm

540*430*1100mm





Hydraulic Jack

Hydraulic Jack

Hydraulic Jack options offered are designed and developed using high carbon steel side plates so as to provide for enhanced chassis strength. Further, these also feature wide front wheels as well as ball bearing mounted rear caster wheels so as to provide for desired process stability and easy maneuverability. Further, its superior designed handle with knurled hand grip also helps in providing non-slip comfort-ability of pumping as well as providing longer reach under vehicle. The presence of overload as well as bypass safety valves also help in preventing jack from being used beyond its rated capacity. The range offered includes jacks like Load Return, Spring Return, Plain Ram, Lock Nut/Load Holding, Threaded Ram, Low Height / Flat type, Hollow Plunger and others.

 

Features :

  • Developed using high carbon steel side plates
  • Designed handle with knurled hand grip

 

 





Car Parking Lift

Features:-
  • Eco design.
  • Instantly double parking space.
  • Safety locks on all post for added safety.
  • Single point lock release.
  • Free jack tray and drip trays.
  • Caster kit for moving the lift.
  • Diamond plate runway and ramps for easy use
  • Complete cover under runways to protect your vehicle



Car Washing Lift

Car Washing Lift


 

 




Multi Car Tech Pvt Ltd
Bhushan S. Bhandarkar (Director)
sr.no19/1A, office no A1, Royal Arcade, nr. shankr maharaj math, satara road, Dhankawadi, Tirthkunj Society
Pune - 411043, Maharashtra, India



Home  |  Profile  |  Our Products  |  Site Map   |  Contact Us   |   Mobile Site

Member IndiaMART.com © Multi Car Tech Pvt Ltd. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited